November: 20% off + 6 instalments at cash price

Home EV charger installation cost 2026: prices and cost factors

The Journal · Sep 30, 2026

Home EV charger installation cost 2026: prices and cost factors

Written by Engin Demirel · Electrical technician, master instructor · 12 years of experience

Short answer: the total cost of a home EV charger is the price of the charger plus the installation (materials and labour) and the electrical project fee. In Bursa, our average price for installing a three-phase home charger (wallbox) depends on the cable length from the distribution board: about TRY 20,000 for up to 10 m, about TRY 35,000 for up to 25 m and about TRY 50,000 for up to 50 m (excl. VAT and the charger). We don't install without an electrical project; the project fee is TRY 15,000 + VAT and is added to the installation price.

The same charger can cost very different amounts to install in two homes. Below we explain what drives the cost, give example scenarios and show how to keep it down.

What determines the installation cost?

  • Cable length: the biggest factor. The longer the run from the board to the charger, the more cable and labour; long runs may need a thicker cable to limit voltage drop.
  • Charging power and cable size: a 22 kW (32 A) installation needs thicker cable and larger protection than 11 kW (16 A). If your car accepts 11 kW AC, an 11 kW installation costs less.
  • Cable route: surface trunking is cheapest. Running cable inside walls, underground in conduit, or cutting concrete adds cost.
  • Board and protection: the charger needs its own breaker and residual current protection. If the board is full, an extra enclosure or rework is needed. Without built-in DC fault detection, a more expensive Type B RCD is required.
  • Electricity contract: if your contracted power is too low, a power increase is requested from the distribution company (UEDAŞ in Bursa); this fee is not part of the installation price.
  • Mounting: wall mounting is standard. Where there is no wall, the charger goes on a pedestal; the pedestal and groundworks are extra.

Average installation prices (Bursa, 2026)

  • Cable length up to 10 m: about TRY 20,000 + VAT
  • Cable length up to 25 m: about TRY 35,000 + VAT
  • Cable length up to 50 m: about TRY 50,000 + VAT
  • Electrical project (every installation): TRY 15,000 + VAT, added to the installation price
  • Site survey: TRY 2,500 + VAT, deducted from the quote if you go ahead with the installation

The installation prices include the mandatory protection devices: a 40 A Type A residual current device (RCD), a 40 A circuit breaker and a surge protector. An over/under-voltage protector is optional and priced separately in the quote if you want one.

These are averages for a three-phase wallbox and do not include the charger. The exact price is given in a detailed written quote after the site survey, once the route, cable size, board and protection needs have been seen. Distances over 50 m and residential or business projects are priced individually. These terms apply from 12.10.2026.

Total cost table: charger + installation + project

The total for a home charger has three parts. Below are current figures for a three-phase wallbox in Bursa (Turkey) by cable length; the Bemis Charger 2 is used as the example charger.

Cable lengthInstallation (excl. VAT)Project (excl. VAT)Installation + project (excl. VAT)Charger (incl. VAT)
Up to 10 mTRY 20,000TRY 15,000TRY 35,000from $344.90
Up to 25 mTRY 35,000TRY 15,000TRY 50,000from $344.90
Up to 50 mTRY 50,000TRY 15,000TRY 65,000from $344.90

The charger price is the current shop price including VAT; VAT is added to the installation and project amounts. The survey fee (TRY 2,500 + VAT) is deducted from the quote if you go ahead, so it is not added to the total. In a single-phase home, a 32 A socket and a portable charger such as the Bemis Mono Mobile (from $308.90) does the same job for less.

What does a wallbox installation price include?

ItemIncluded in the installation price?Note
Cable and trunking from the panel (by length category)YesSurface trunking is standard
40 A Type A RCD, 40 A circuit breaker, surge protectorYesMandatory protection
Mounting, setup and test with your carYes5-year warranty on workmanship
The charger itselfNoBought separately
Electrical projectNoTRY 15,000 + VAT, every installation
Type B RCDNoOnly if the charger has no DC leakage detection
Over/under-voltage protectorNoOptional
Underground cable, digging, concrete cuttingNoPriced at the survey
PedestalNoNeeded where there is no wall
Power increase or switch to three-phaseNoFee paid to the distribution company

So a "wallbox installation price" usually means cable, protection and labour; the charger, the project and grid-operator work are priced separately. Our quotes list each item on its own line.

Example scenarios

  • Detached house, board in the garage, charger 8 m away: the up-to-10 m category, about TRY 20,000 + VAT.
  • Apartment, car in an underground car park about 20 m from the flat's board: the up-to-25 m category, about TRY 35,000 + VAT; the building management's approval is needed to cross shared areas.
  • Villa, board inside the house, charger at the garden gate with 40 m of underground cable: the up-to-50 m category, about TRY 50,000 + VAT; digging and reinstatement are assessed during the survey.

In all three scenarios the electrical project fee (TRY 15,000 + VAT) is added to these amounts; the charger is not included.

Homes with single-phase power

With single-phase power the maximum charging power is 7.4 kW. You can either switch to three-phase and install a wallbox, or have a blue 32 A industrial socket in a fused combination box installed and use a single-phase portable charger such as the Mono Mobile. The second option is often cheaper, but charging takes longer.

How to reduce the installation cost

  • Place the charger as close to the board as possible – every metre counts.
  • Don't choose more power than you need: if your car accepts 11 kW, an 11 kW installation means thinner cable and cheaper protection. Bemis Charger Plus 2 and Pro 2 power can be changed in the app, so upgrading later is easy.
  • A charger with built-in DC fault detection can avoid the need for an expensive Type B RCD.
  • In shared car parks, plan a group installation with load-balancing chargers rather than one by one, so infrastructure is shared and cost per user falls.
  • For short distances and small budgets, a portable charger with a fused combination socket is also an option.

How installation works

  1. Site survey (TRY 2,500 + VAT): the board, contract and cable route are checked and the charger position agreed.
  2. Written quote: installation, electrical project and any extra work are itemised; the survey fee is deducted from the quote.
  3. Payment: once you accept the quote, the full amount is transferred to our company account.
  4. Installation: we agree the installation day together, install, set the charger up for your installation and test it with your car.

Chargers we install carry a 5-year workmanship warranty. These terms apply from 12.10.2026.

Can you install a DC fast charger at home?

Technically yes, but it makes no sense for a home. A DC fast charger needs high connection power (often a dedicated transformer) and costs many times as much as a home wallbox, while the car charges overnight on AC anyway. The realistic "fast" option at home is an 11 kW AC wallbox on a three-phase supply (22 kW if your car supports it). See our guide on AC vs DC charging.

Installation cost in apartment blocks and residential complexes

In a shared car park the cost is driven mainly by the distance from the flat's panel to the parking space and the route through common areas; most jobs fall into the 25–50 m category. If several residents want to charge, shared infrastructure with load-balancing chargers costs less per household than a separate circuit for each. Rules for new and existing buildings in Turkey are in our building charging regulation guide. For a survey and quote in Bursa, see our EV charger installation page.

Frequently asked questions

How much does it cost to install an EV charger at home?

The total is the charger price plus installation and the electrical project fee. In Bursa, installing a three-phase wallbox costs about TRY 20,000 for up to 10 m of cable, about TRY 35,000 for up to 25 m and about TRY 50,000 for up to 50 m (excl. VAT and the charger); the project fee of TRY 15,000 + VAT is added on top.

Is the charger included in the installation price?

No. The installation price covers cable, the mandatory protection (40 A Type A RCD, 40 A circuit breaker, surge protector) and labour; the charger is bought separately and the electrical project fee is added on top.

Who pays if a power increase is needed?

A contracted power increase is an application to the distribution company (UEDAŞ in Bursa) and is not included in the installation price. During the survey we check whether it's needed and look at alternatives such as a lower power setting.

How can I get an exact price?

We carry out site surveys in Bursa for TRY 2,500 + VAT. You then get a detailed written quote; if you accept it and go ahead with the installation, the survey fee is deducted from the quote. These terms apply from 12.10.2026.

Is the electrical project included in the installation price?

No. We don't install without an electrical project; the project fee is TRY 15,000 + VAT and is added to the installation price.

Do I need an over/under-voltage protector?

It is optional; if you want one, it is priced separately in the quote. The 40 A Type A RCD, 40 A circuit breaker and surge protector are mandatory in every installation and included in the installation price.

How much does a wallbox installation cost?

In Bursa, installing a three-phase wallbox costs about TRY 20,000 up to 10 m of cable, TRY 35,000 up to 25 m and TRY 50,000 up to 50 m (excluding VAT and the charger). The project fee (TRY 15,000 + VAT) is added.

What is the total cost of a home charger including the device?

The total is charger + installation + project. Up to 10 m, installation and project together come to about TRY 35,000 + VAT, and the charger starts from $344.90 for a Bemis Charger 2.

What is included in a wallbox installation price?

Cable and trunking from the panel, a 40 A Type A RCD, a 40 A breaker, a surge protector, mounting and testing. The charger, project, a Type B RCD if needed, digging, a pedestal and grid power increases are not included.

Can I install a DC fast charger at home?

It is not recommended: it needs high connection power and often a transformer, and the unit costs many times a home wallbox. The fastest realistic option at home is an 11 kW three-phase AC wallbox (22 kW if the car supports it).

How much does a charger in a shared car park cost?

Mostly the distance from the flat's panel to the car park decides; such jobs usually fall into the 25–50 m category (about TRY 35,000–TRY 50,000 + VAT in Bursa). Load-balanced group installations lower the cost per household.